jewelry display forms wholesale The more detailed the method of making the tie, the better, the handmade, the best graphic text

lizas jewelry wholesale First, there is no first -class board and cutter to make a good tie for making the board and tailoring process, which is almost impossible. The quality of a tie tailoring is mainly reflected in the following aspects: 1. Whether the shape of the entire tie is well -proportioned; 2. Whether the tie pattern pattern is symmetrical and whether the stripes are parallel to the size of the head; 3. Whether the cutting angle is correct? The tailoring of the tie must be a chain shape when the corner of the standard is 45 degrees such as the angle of the angle is not positive, and it becomes difficult to add the sewing process in the back. Tailoring the feed is a science. The level of the material directly affects the cost of the product. For example, the cutting rate does not pay attention to the material rate, which will greatly weaken the company's dispute in the market. Essence It is not necessary to mention the importance of the board. How to let the wornker feel the combination after taking the tie. The design of board types is generally related to the brand style or product style. The plate types of different styles of product tie should be different, because the demands of the product are different, the expected effects are different, especially in the present era There are more and more people, so the boardmakers should make more humanized considerations and strive to study the needs of different types of others.

. The refutation (Baotou) process refutation (Baotou) is generally a thin fabric (commonly known as silk) and the fabric is positive to the front car seam, and then flip it into right corners (also alien with alien ones. Such as 60 degrees diagonal angle, round head, etc.). (1) (2) (3) (4) (5) Silbbu usually use polyester dyeing or litter fabric at home and abroad, and a few also use real silk dyeing cloths or shift cloths. of. The length of Silib is an important indicator that determines the degree of difficulty. The longer the length, the greater the difficulty. Low -crotch machine tie large heads are sometimes only less than 10cm, while the length of the high -crotch like a 40 % discount on the length can reach 25cm. Some brand ties will weave the company's logo or brand trademark in Sili. The pins in the seam must be densely not exposed, and each 3 cm should not be less than 12 stitches. The sealing corner is doubled. Whether the back of the head is right, and whether the code is dense and dew is an important indicator for judging whether the tie process is sophisticated. When making oblique tie tie, pay attention to the stripes and the tie's big head and small headline, otherwise the tie made of the fabric can only be ranked in the low crotch band.

. The stitching and stitching of the tie fabric pays attention to the consistency of the latitude yarn, the pattern is aligned, the needle code is dense and flat, and the split seam is fully straight. It is generally not easy to see the seams after doing it. It is worth noting that the tie fabric of the plain -colored shading effect must also pay attention to the consistency of the latitude and weft yarn during stitching, otherwise the surface color of the two fabrics on the two ends after the tie must be one of them. The third is that one of the layers of the seams is easy to rise, and the fourth is that the manual sewing process is not easy to sew, and the crotch of the last tie naturally came down. Fourth, the initial scalding of the tie (buried) tie is completely handmade. Whether the pattern of the tie is symmetrical or not, whether the shape of the shape is straight, depending on the handicraft of the handmade Whether the sewing on the back of the tie is straight and the middle of the tie, and whether the tie's head and the side line lining are in place, which depends entirely on the craftsmanship of the initial hot. The above -mentioned tie above mentioned that there should be no defects. The first scalding method of the tie, the 70 % discount method, and the lonely hot method of the tie. The latter two difficulties are generally not commonly used, but it can improve the quality of the product to a very well. Compared with the cost, it will increase the cost of product.

. The handmade sewing part of the tie is the same as the initial scalding of the tie. The hand -sewing of the tie is also a complete handicraft work. Chain or drum bag.
This sewing process has a wide variety of tricks, mainly reflected in three aspects: 1. The seam method is generally divided into two categories, one is the dark line sewing method, and the other is a bright line sewing method. In addition to the seams on the back of the sewing tie, the light line sewing method also has the edge of the sewing tie. The light line seams have straight lines and the cross -shaped seams are 2. Simple knots and so on. Flowers and simple knots are two extremes. One is extremely complicated and minimalist. The two types of French Italian manufacturers use the most. Generally, it is generally used in the country to use conventional medium or bias. 3. Switching color, the stitching color one is smooth, the stitching is color or the same color with the fabric, and the other is a contrast color. Use when the line.